How to Connect Ring Camera to New Wifi (Complete Guide)

Due to technological advancement, your home and office’s security should be a priority. As a result, gadgets like the Ring Camera, Doorbell, and it like have become vital security gadgets for home security. Should in case you change your WiFi network or upgrade to a new router, reconnecting your Ring Camera to the new or upgraded wifi is a must to ensure continuous surveillance. In case you just relocated, switched internet service providers, or updated your WiFi, this article will guide you through how to connect Ring Camera to new WiFi network in a tickle of an eye.

Why Is Reconnecting Your Ring Camera to WiFi Important?

Your Ring Camera requires a reliable internet connection to work effectively. Without WiFi, your camera will be incapable of sending alerts, transmitting live video, or saving footage to the cloud. As a result, anytime your network changes, you must guarantee that your Ring Camera remains connected.

Step 1: Check Your WiFi Details

The first thing is to have the necessary information regarding your new WiFi network. The information includes

WiFi Name: it is the name of the WiFi network.
Wi-Fi Password: it is the password of the router, the camera will connect to.
It is critical to double-check these facts for accuracy, since inaccurate information may prevent the Ring Camera from connecting successfully.

Step 2: Power Cycle Your Ring Camera

If your Ring Camera is already linked to one network and you wish to move to another, a power cycle will reset it for a new connection.

To accomplish the process of connecting Ring Camera to new WiFi:

Turn off the Ring Camera.
Disconnect it from the electrical source.
Wait for approximately 10 seconds.
Plug the camera back in and turn it on.

This resets the Ring camera and prepares it for reconnection to new WiFi.

Step 3: Connect the Ring app

The next step after the camera is set is to connect the Ring app already on your phone or tablet with the camera. The Ring app is the control panel from which the gadgets are controlled, either the doorbells or cameras.

Step 4: Select the device you want to connect

After you open the app:

Locate the menu icon on the top-left side of your screen.
Select the device from the dropdown icon.
Select the Ring Camera you wish to reconnect.
This will take you to your camera’s settings, where you may customize all of its functions.

Step 5: Reconnect with WiFi

To begin the procedure of connecting Ring Camera to the new WiFi network:

Select Device Health from the camera’s options.
In Device Health, choose Change WiFi Network or Reconnect to WiFi.
Follow the app’s setup procedure to select your new WiFi network from a list of available options.
Enter your WiFi password as requested.
After entering your credentials, the Ring camera will connect to the new wifi network. This process might take a few seconds, but after that, when it is completed, a message of confirmation will be sent to the provided email.

Step 6: Test run the connection

Once your camera is linked to the new WiFi, you must test the connection to check that everything works correctly. Here’s how.

Return to the Device Dashboard in the Ring App.
Check your camera’s Live View to ensure uninterrupted recording.
Check for latency or loading difficulties, which might indicate a poor WiFi signal.
If your Ring Camera connects, then you are good to go but if you have any issues, try changing the router location closer to the camera or installing a WiFi extender to improve the connection.

Troubleshooting Ring Camera Connection Issues

In case your Ring Camera didn’t connect with the new wifi immediately, no worries. The following steps will help in the troubleshooting process:

Cross-check your WiFi password: Make sure you entered the right password for the new wifi network.
Change the router closer to the ring camera: check if the router is too far from the camera. If so the signal might not be strong enough to connect. Then, try to move the camera closer.
Restart your router to address connectivity difficulties.
Almost all Ring Cameras use a 2.4 GHz WiFi network. If your new router uses a 5 GHz frequency, make sure you switch to the 2.4 GHz band.
If everything else fails, factory reset your Ring Camera to restart the Ring Camera setup procedure from scratch. To accomplish this, press and hold the camera’s reset button for 15 seconds.

Maintaining a Strong WiFi Connection

Follow these recommendations to keep your Ring Camera connected to new WiFi network and functioning efficiently.

Position your router centrally for optimal connectivity with your camera.
To prevent interference, keep your router away from walls, metal objects, and electronic equipment that might disturb the signal.
Use a WiFi extension for larger homes or numerous levels to improve signal strength to your camera placement.

Wrapping Up

This is how you can connect your Ring Camera to new WiFi. Here’s to hoping that you have success with the overall process of connecting your Ring Camera. Stay tuned for more on Ring Camera!

Just in case, even after following the steps above, you are not able to get things done, feel free to contact us for more support on this topic!